Preci-Tip™ Precision Dispensing Tips or Nozzles are designed for accurate dispensing of dots, beads or in-fills. Their streamline conical fluid path delivers considerably higher fluid flow rates and lower dispense pump back pressures than most standard dispensing tips. This results in improved dispensing accuracy and component life. The thin wall nozzle cores are produced using a deep drawing process, giving particularly low resistance to fluid flow, and exceptional accuracy and robustness compared to plastic dispensing tips or nozzles.
Dispense dots and beads as small as 50 microns
High accuracy, repeatable dispensing
Reduces dispense pump back pressure, improving performance
Tips are clog-resistant and tapered for ease of flow, with good fluid break-off
Resist stringing
Rigid metal nozzles have a much longer lifespan than single-use plastic dispensing tips
Precise exit apertures
Industry standard Luer Lock fitting compatible with any of our dispensing valves, pumps, or barrels
Dispense dots and beads as small as 50 microns
High accuracy, repeatable dispensing
Reduces dispense pump back pressure, improving performance
Tips are clog-resistant and tapered for ease of flow, with good fluid break-off
Resist stringing
Rigid metal nozzles have a much longer lifespan than single-use plastic dispensing tips
Precise exit apertures
Industry standard Luer Lock fitting compatible with any of our dispensing valves, pumps, or barrels
Dispense dots and beads as small as 50 microns
High accuracy, repeatable dispensing
Reduces dispense pump back pressure, improving performance
Tips are clog-resistant and tapered for ease of flow, with good fluid break-off
Resist stringing
Rigid metal nozzles have a much longer lifespan than single-use plastic dispensing tips
Precise exit apertures
Industry standard Luer Lock fitting compatible with any of our dispensing valves, pumps, or barrels
Preci-Tip™ Precision Dispensing Tips or Nozzles are designed for accurate dispensing of dots, beads or in-fills. Their streamline conical fluid path delivers considerably higher fluid flow rates and lower dispense pump back pressures than most standard dispensing tips. This results in improved dispensing accuracy and component life. The thin wall nozzle cores are produced using a deep drawing process, giving particularly low resistance to fluid flow, and exceptional accuracy and robustness compared to plastic dispensing tips or nozzles.
They have an industry standard Luer Lock thread and can be used with common dispensing barrels or valves.
Preci-Tip Precision Dispensing Tips feature walls which are very thin and rigid, resulting in a smaller outer diameter (OD) required for large inner diameter (ID) fluid paths. This can be particularly useful where a small gauge tip is needed, without compromising on fluid dispense rates. The thin walls further enhance the accuracy and definition of dots, lines or special patterns, and dramatically reduce fluid stringing or tailing tendencies.
Preci-Tip Precision Dispensing Tipsstandard gauge tips are made from phosphor bronze with electroless nickel coating. This provides a hard, abrasion resistant nozzle with low resistance to fluid flow. As an option, Preci-Tips are available with a nickel PTFE coating – an electroless nickel coating with polytetrafluoroethylene particles. This provides a hard, abrasion resistant, inert, lubricious and hydrophobic surface which provides even better release of liquids and oils. Micro-gauge Preci-Tips are made from nickel silver. All Preci-Tips have polypropylene hubs.
Specifications
Nominal overall length
18mm
Hub temperature tolerance
-23ºC to 100ºC
Not sure if this is what you need?
Our technical sales team is on-hand to discuss your application and provide advice and recommendations. Call us at 01865 842842, Monday to Friday 9am - 5pm, or email us at info@intertronics.co.uk. Check out intertronics.co.uk for more information.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.